Accra, Ghana · Serving industry nationwide

Products

Solutions for every asset integrity challenge

Five product lines covering prevention, protection and repair, backed by international technology partners.

Pipe supports sealed in a grey thermoplastic protective coating
SFL-001

Surface-Tolerant Corrosion Coating

A hot-melt thermoplastic coating that seals flanges, valves, bolts and pipe supports against moisture and oxygen. It can be peeled off for inspection at any time, with minimal surface preparation.

  • Thermoplastic
  • Removable
  • No shutdown
Technician pressing a cold-applied yellow repair patch onto a wind turbine foundation at sea
SFL-002

Cold-Applied Coating Repair

A self-adhering visco-elastic base coat, finished with a liquid elastomeric top coat. Repairs damaged coatings on wind turbines and offshore steel by hand, with no primer, no blasting and no curing time.

  • ApplicationCold, by hand, as a patch
  • StandardMeets ISO 20340 (offshore)
  • Cold applied
  • No blasting
  • Offshore wind
Two workers wrapping a large buried pipeline with a corrosion prevention tape and outer wrap
SFL-003

Self-Healing Corrosion Prevention

A visco-elastic coating that flows back into small scratches and dents, so the seal stays intact. Used on pipelines, field joints, refineries, water facilities, jetty piles and renewable energy structures.

  • Temperature−40 °C to +95 °C
  • StandardsEN 12068 C50, ISO 21809-3, NSF/ANSI 61
  • Self-healing
  • Onshore & offshore
  • Drinking water safe
SFL-004

Linings & Refurbishment

Acid proofing, flooring refractory, plastic and flake-glass linings, industrial painting, pump lining and casing refurbishment, and rubber linings.

  • Acid proofing
  • Linings
  • Pump refurbishment
Technician wrapping a pipe with resin-saturated composite repair tape
SFL-005

Composite Repair Systems

Engineered composite wraps that restore corroded, dented or leaking pipes, tanks and vessels to their original design specification, so they can run at full operating pressure. Applied live, with no shutdown and no hot work.

  • SFL-CR185High-temperature composite repair, up to 200 °C
  • SFL-CR110Medium-temperature composite repair, up to 150 °C
  • SFL-CR80Standard composite repair, up to 80 °C
  • SFL-PCIntelligent post-cure system for maximum repair strength
  • SFL-LCEmergency online leak clamp
  • SFL-LSRapid leak strap, fitted in about 20 seconds

Installed by certified SFE technicians to ASME PCC-2 and ISO/TS 24817.

  • No shutdown
  • No hot work
  • ASME PCC-2
  • ISO/TS 24817
Large pipe bend reinforced with a black carbon fibre composite wrap
SFL-CR185

High-Temperature Composite Repair

Our strongest carbon fibre wrap for hot, high-pressure lines. Restores damaged pipework to its original design specification while the system stays live.

  • TemperatureFrom sub-zero up to 200 °C
  • SystemBiaxial carbon fibre, hand lamination or infusion
  • RepairsInternal & external corrosion, mechanical damage, weld anomalies
  • Used onPipes of any size, bends, tanks, vessels, flanges and structures
  • StandardsASME PCC-2, ISO/TS 24817; designs verified by FEA
  • Live repair
  • No hot work
  • Chemical resistant
  • Up to 200 °C
Close-up of carbon fibre composite tape being wrapped around a pipe
SFL-CR110

Medium-Temperature Composite Repair

Carbon fibre composite repair for process lines, tanks and vessels that run warm. High pressure containment, applied without shutdown.

  • TemperatureFrom sub-zero up to 150 °C
  • SystemBiaxial carbon fibre, hand lamination or infusion
  • RepairsInternal & external corrosion, mechanical damage, weld anomalies
  • Used onPipes of any size, bends, tanks, vessels, flanges and structures
  • StandardsASME PCC-2, ISO/TS 24817; designs verified by FEA
  • Live repair
  • No hot work
  • Chemical resistant
  • Up to 150 °C
Composite repair wrap being applied to an excavated pipeline
SFL-CR80

Standard Composite Repair

The all-round composite repair for water lines, pipelines and plant pipework at normal operating temperatures. Available in carbon fibre or glass fibre.

  • TemperatureFrom sub-zero up to 80 °C (glass fibre) or 70 °C (carbon fibre)
  • SystemCarbon fibre or glass fibre, hand lamination or infusion
  • RepairsInternal & external corrosion, mechanical damage, weld anomalies
  • Used onPipes of any size, bends, tanks, vessels, flanges and structures
  • StandardsASME PCC-2, ISO/TS 24817; designs verified by FEA
  • Live repair
  • No hot work
  • Chemical resistant
  • Water & pipelines
SFL-PC

Intelligent Post-Cure System

A heated blanket and smart controller that cure composite repairs on site, so every wrap reaches its full strength and chemical resistance. It also makes repairs possible in cold weather and on cold process lines.

  • How it worksHeating blanket and insulation over the wrap; the controller runs the cure cycle automatically and switches off when done
  • ControlKeeps a stable temperature even when the pipe temperature changes
  • RecordsLogs the full cure cycle with temperature graphs for your QA file
  • On siteLightweight, portable, low power
  • Quality assured
  • Cure data logged
  • Cold conditions
SFE team fitting a leak-sealing clamp on a live pipe
SFL-LC

Emergency Online Leak Clamp

Stops active high-pressure leaks on live pipework without shutting the system down. The low-profile clamp can then be over-wrapped with an SFL composite repair for a long-term fix.

  • SealsPinholes, through-wall corrosion and weld defects, holes up to 25 mm
  • PressureApplication up to 150 bar
  • TemperatureUp to 200 °C; higher on request
  • Pipe sizes½" to 56"; larger sizes and subsea on request
  • DesignIn general accordance with ASME VIII Div 1
  • Live leak
  • No hot work
  • High pressure
Water spraying from a leaking pipe under pressure
SFL-LS

Rapid Leak Strap

The fastest way to stop a live leak: a composite strap that is fitted in about 20 seconds, then over-wrapped with a composite repair for a permanent fix. Also suitable for divers and underwater work.

  • Fitting timeAbout 20 seconds
  • SealsHoles up to 19 mm, on all pipe materials
  • PressureUp to 30 bar
  • TemperatureUp to 100 °C
  • MaterialLightweight, non-corrosive, non-conductive
  • 20 seconds
  • Underwater
  • Water lines

Not sure which product you need?

Describe the problem and we'll recommend the right system.

Request a quote